Question 1

What is the dariorasero H PL series?

Accepted Answer

The H PL series is a professional line of food-grade plastic scoops designed and manufactured by Euro Satip Srl in Turin, Italy, under the dariorasero registered trademark. The name stands for H series in plastic. These scoops are engineered for food processing, pharmaceutical, agricultural, and industrial applications, combining Italian design with certified food-contact materials. The series includes 7 SKUs (codes 1012PL, 1016PL, 1020PL, 1023PL, 1026PL, 1030PL, 3126PL) with volumes from 150 cm³ to 2400 cm³.

Question 2

What material are H PL series scoops made from?

Accepted Answer

The dariorasero H PL series scoops are manufactured from food-grade injection-molded polypropylene (PP). This material is certified for direct food contact under Regulation (EC) 1935/2004 and Regulation (EU) 10/2011. Polypropylene is BPA-free, phthalate-free, chemical resistant, non-porous, and withstands operating temperatures from -20°C to +100°C continuous, with autoclave compatibility up to 121°C.

Question 3

Who manufactures dariorasero scoops?

Accepted Answer

All dariorasero H PL series scoops are manufactured by Euro Satip Srl, an Italian company active since 1950. The complete production process, from polypropylene injection molding to quality control and packaging, takes place entirely in Italy at the operational site located in Via Nicomede Bianchi 109, 10146 Turin, under ISO 9001:2015 certified Quality Management System.

Question 4

Are H PL series scoops HACCP compliant?

Accepted Answer

Yes. The dariorasero H PL series scoops are available in 5 HACCP-compliant colors: white for dairy products, flour and multi-purpose use; red for raw meat and butchery; blue for fish and seafood; yellow for poultry and white meat; green for raw vegetables and produce. Using dedicated color-coded scoops in each processing zone prevents cross-contamination as required by Regulation (EC) 852/2004 on the hygiene of foodstuffs.

Question 5

What scoop models are available in the H PL series?

Accepted Answer

The dariorasero H PL series includes 7 SKUs across two body geometries: 6 round-base scoops (codes 1012PL, 1016PL, 1020PL, 1023PL, 1026PL, 1030PL) with volumes of 150, 325, 625, 1000, 1500 and 2300 cm³ respectively, and 1 flat-bottom scoop (code 3126PL) at 2400 cm³ for precise weighing and uniform powder transfer. All models feature ergonomic handles, easy-clean matte surfaces, and integrated batch traceability date codes.

Question 6

What is the advantage of polypropylene over other plastics for food scoops?

Accepted Answer

Polypropylene (PP) offers superior impact resistance, continuous operating temperature up to +100°C (autoclave-safe up to 121°C), and chemical resistance compared to polystyrene and polyethylene. PP is fully BPA-free, phthalate-free, has a non-porous antistatic surface preventing bacterial growth and dust adhesion, and complies with Regulation (EC) 1935/2004, Regulation (EU) 10/2011 and EN 1186 migration testing standards.

Question 7

How do HACCP color-coded scoops prevent cross-contamination?

Accepted Answer

HACCP color coding assigns specific colors to food categories: red for raw meat (UK BMPA standard), blue for fish and seafood (Seafish, mandatory), yellow for poultry and white meat (BPC), green for vegetables and produce (FSA, FPC), white for dairy, bakery and multi-purpose (FSA). Using a different colored scoop in each zone ensures tools for raw products never contact ready-to-eat items. This visual system works across language barriers and is a documented HACCP control.

Question 8

What industries use dariorasero H PL series scoops?

Accepted Answer

The dariorasero H PL series serves food processing (industrial bakeries, pastry shops, confectioneries, fresh pasta, artisan ice cream), retail (large distribution GDO, fresh counters, butchers, fishmongers, delicatessens), pharmaceutical (GMP drug production, MHRA-aligned), cosmetics, chemical industry labs and analysis labs (ISO 17025), catering and banqueting, animal feed and agricultural use, and food R&D centres. All scoops are manufactured by Euro Satip Srl in Turin, Italy.

Question 9

What makes dariorasero scoops different from other brands?

Accepted Answer

The dariorasero H PL series by Euro Satip Srl features full Made in Italy manufacturing in Turin since 1950, ISO 9001:2015 certified Quality Management System, premium ergonomic handles, certified food-grade polypropylene compliant with EU Regulations 1935/2004 and 10/2011, EN 1186 migration tested, easy-clean matte surface engineered to prevent residue adhesion, integrated batch traceability date code on the handle, and a complete documentation package (Declaration of Conformity, ISO certificate, EN 1186 reports, technical data sheets) ready for BRCGS, IFS Food and FSSC 22000 audits.

Question 10

Can I order dariorasero scoops in bulk for my business?

Accepted Answer

Yes. Euro Satip Srl offers B2B supply for distributors, food manufacturers, pharmaceutical manufacturers, industrial partners, OEM customers and equipment suppliers across the EU, UK and international markets. Bulk supply with consistent quality is guaranteed through precision injection molding under ISO 9001:2015 certified QMS. Contact info@dariorasero.com or call +39 011 74 92 922 for wholesale enquiries and quotes.

Question 11

How should I clean and maintain food grade plastic scoops?

Accepted Answer

Clean polypropylene scoops after each use with warm water (up to 80°C) and food-safe detergent. For deep sanitization, autoclave at up to 121°C or use food-industry approved chemical disinfectants (quaternary ammonium, peracetic acid, hypochlorite at recommended dilutions). Industrial dishwasher cycles up to 90°C are compatible. The non-porous antistatic PP surface does not absorb liquids or odors. In HACCP-managed facilities, store color-coded scoops separately by color to prevent operational cross-contamination.

Question 12

What EU regulations apply to food-grade plastic scoops?

Accepted Answer

Food-grade plastic scoops must comply with Regulation (EC) 1935/2004 (framework for food contact materials, Article 3 safety principle), Regulation (EU) 10/2011 (specific for plastic FCM with Specific Migration Limits and Overall Migration Limit of 10 mg/dm²), and Regulation (EC) 852/2004 on the hygiene of foodstuffs. The dariorasero H PL series by Euro Satip Srl is produced in full compliance with these EU standards, with Declaration of Conformity (DoC) issued for every reference under Articles 15-16 of Regulation (EC) 1935/2004.

Question 13

What is injection molding and why does it matter for food scoops?

Accepted Answer

Injection molding injects molten polypropylene under high pressure into a precision steel mold, creating a seamless one-piece construction with no joints, welds or crevices where bacteria, powders or residues could accumulate. This ensures consistent wall thickness, uniform density, and dimensional repeatability across production batches. Euro Satip Srl uses this technology for all dariorasero H PL series scoops, with reinforced rim along the entire scoop profile for increased rigidity.

Question 14

Are dariorasero scoops suitable for pharmaceutical applications?

Accepted Answer

Yes. The food-grade polypropylene is chemically inert, resistant to most solvents and acids, autoclavable for sterilization up to 121°C, and produces no particulate contamination during use. The one-piece injection-molded construction eliminates joints where API powder residue could accumulate, making dariorasero H PL scoops suitable for EU GMP and UK MHRA pharmaceutical applications. The 1550 ml volume (code 1026PL) is the most frequently specified for pharmaceutical batch production and API handling.

Question 15

Why choose a Made in Italy food scoop?

Accepted Answer

A Made in Italy food scoop from dariorasero by Euro Satip Srl combines Italian design tradition since 1950 with industrial precision. Each H PL series scoop is designed with attention to ergonomics, material quality, and aesthetic refinement. Italian manufacturing under ISO 9001:2015 certification means EU regulatory compliance is built into the production process with full batch traceability via integrated handle date code, supporting BRCGS, IFS Food and FSSC 22000 audit requirements.

Question 16

What is the difference between a round base and flat bottom scoop?

Accepted Answer

The Round Base scoops (HPL series codes 1012PL through 1030PL, 6 SKUs from 150 to 2300 cm³) have a curved bottom that conforms to round containers and deep bins, ideal for scooping granular materials from depth. The Flat Bottom scoop (code 3126PL, 2400 cm³) has a level base for stability on scales, counters and worktops, preferred for precise weighing, portioning, confectionery display and uniform powder transfer in industrial settings. Both models share the same ergonomic handle design and food-grade polypropylene construction by Euro Satip Srl.

Polypropylene Injection Molded Scoop – Technical Performance

contacts

Contacts